Small Footprint with High Efficiency
Due to its small size and high electrical efficiency, the TS-WX010A compact subwoofer is a perfect upgrade for many of today’s vehicles, especially EV (electric vehicle) and gasoline/electric hybrid vehicles where low weight, small size and low power consumption are a priority. Measuring only 9-inches wide, 4-5/8” deep, and 2-3/4” high, and weighing just under 3-1/2 pounds, the TS-WX010A is the smallest and lightest powered subwoofer in the Pioneer lineup. In comparison, the TS-WX010A is 48% smaller than Pioneer’s next smallest powered subwoofer, the TS-WX130DA.
Small Subwoofer with High Power
A rectangular woofer with a low mass, high strength aluminum cone, urethane surround and high-power magnetic circuit housed in a down firing sealed enclosure made of high-grade resin. This compact subwoofer is powered by a built-in Class-D amplifier rated at 50 watts RMS output.
Vertical or Horizontal Installation
The compact dimensions of the TS-WX010A allows installation inside the passenger compartment of most vehicles, providing the potential to integrate acoustically with the vehicle’s full range speakers and seamlessly enhance both output and overall sound quality. With installation options that include vertical or horizontal mounting, the TS-WX010A is optimized for installation in the passenger side footwell, where its small size affords the ability to be attached near the underside of the dashboard or the center console. Warning: This product must never be installed anywhere in the driver area or elsewhere in the vehicle where it might interfere with its safe operation or impair the performance of operating systems or safety features, including air bags, controls and indicators (lights). Appropriate installation locations will depend on the vehicle model including, specific to hybrid and electric vehicles, the location of the vehicle battery and battery charging system, and where the TS-WX010A can be attached securely.
Down firing system
For foot space and effective reproduction of deep, powerful bass. The TS-WX010A features a full grille and down firing structure for cone protection to be installed inside your vehicle interior. This combines deep, powerful bass while seamlessly integrating physically, electrically and most importantly acoustically into the vehicle.
Bass Sound Creator
Designed to be small in size with reduced power consumption while still producing impactful bass output for enhanced sound quality, the TS-WX010A accepts both RCA type line level and speaker level inputs for connection to aftermarket audio systems or integration into factory-installed systems, making installation a simple process.
CarSoundfit
Pioneer’s Car Sound Fit app is actually a car sound simulator for experiencing in-car sound with your own smartphone. Hear the difference between original car speakers and different Pioneer audio upgrades: convince yourself of the level of quality Pioneer can offer for your vehicle. For a virtual listening demonstration of these and many other Pioneer car speakers, download the free Pioneer CarSoundFit app.
FEATURES | |
---|---|
Amp - Grounding
Negative
|
Built In Amp
Yes
|
CarSoundFit
Yes
|
Cut Out dimensions
No
|
Equivalent Compliance (VAS)
No
|
Free Air ResoNAnce (Fs)
No
|
Linear Excursion (Xmax)
No
|
Port Diameter
No
|
Port Length
No
|
Recommended Ported Box Internal volume
No
|
Recommended Sealed Enclosure Volume
No
|
Subwoofer Grille
No
|
Total Speaker Q (Qts)
No
|
FEATURES |
---|
Amp - Grounding
Negative
|
Built In Amp
Yes
|
CarSoundFit
Yes
|
Cut Out dimensions
No
|
Equivalent Compliance (VAS)
No
|
Free Air ResoNAnce (Fs)
No
|
Linear Excursion (Xmax)
No
|
Port Diameter
No
|
Port Length
No
|
Recommended Ported Box Internal volume
No
|
Recommended Sealed Enclosure Volume
No
|
Subwoofer Grille
No
|
Total Speaker Q (Qts)
No
|
MATERIALS | |
---|---|
Basket Material
Metal
|
Center Cap Material
NA
|
Cone Material
Cellulose fiber
|
Custom Fit Basket
No
|
Damper
Aramid Fiber
|
Drive Cone Material
Cellulose Fiber
|
Gasket
No
|
Magnet Material
Ferrite
|
Magnet Weight
9.5 oz
|
Surround Material
Urethane
|
Surround Type
Rolled
|
Voice Coil Material
Glass Imide
|
Voice Coil Special Feature
No
|
Voice Coil Type
Single Voice Coil
|
Voice Coil wire
Copper
|
Wire Terminals
No
|
MATERIALS |
---|
Basket Material
Metal
|
Center Cap Material
NA
|
Cone Material
Cellulose fiber
|
Custom Fit Basket
No
|
Damper
Aramid Fiber
|
Drive Cone Material
Cellulose Fiber
|
Gasket
No
|
Magnet Material
Ferrite
|
Magnet Weight
9.5 oz
|
Surround Material
Urethane
|
Surround Type
Rolled
|
Voice Coil Material
Glass Imide
|
Voice Coil Special Feature
No
|
Voice Coil Type
Single Voice Coil
|
Voice Coil wire
Copper
|
Wire Terminals
No
|
PRODUCT PERFORMANCE | |
---|---|
Amp - Max Current Consumption
4.2 A
|
Amp - Power Source
DC 14.4V
|
Bass Boost
No
|
Bass Boost - Frequency
No
|
Bass Boost Knob - Wired
No
|
Bass Boost - Level
No
|
Continuous Power handling (RMS) - Watts
50
|
Frequency Response
20 Hz to 200 Hz
|
Input Level @Gain Max
2 V to 6 V
|
Maximum Peak Power Handling - Watts
160
|
Sensitivity (1W/1m)
98dB
|
Speaker Line input Sensor
1.4V+1.4V/5KOhm
|
System-Type
Powered
|
PRODUCT PERFORMANCE |
---|
Amp - Max Current Consumption
4.2 A
|
Amp - Power Source
DC 14.4V
|
Bass Boost
No
|
Bass Boost - Frequency
No
|
Bass Boost Knob - Wired
No
|
Bass Boost - Level
No
|
Continuous Power handling (RMS) - Watts
50
|
Frequency Response
20 Hz to 200 Hz
|
Input Level @Gain Max
2 V to 6 V
|
Maximum Peak Power Handling - Watts
160
|
Sensitivity (1W/1m)
98dB
|
Speaker Line input Sensor
1.4V+1.4V/5KOhm
|
System-Type
Powered
|