Upgrade to High Performance
Pioneer’s A-series shallow-mount subwoofers delivers big bass performance of a full-size subwoofer, but in a compact design. Designed to provide wider installation options for a broad range of vehicle, this A-Series subwoofer produces seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel the music.
Angled Push Terminals
Traditional subwoofer terminals are mounted horizontally or vertically. These mounts force wires to be bent to fit which can be difficult if low gauge high-performance wires are used. The Pioneer shallow subwoofer’s angled binding-post push terminals make it easy to connect speaker wires, saves space, and make installation easier. Two metal angle brackets and eight 1 screws are provided for mounting the enclosure to a trunk or rear compartment floor in an upright fashion. Four screw-on feet also allow the enclosure to be mounted flat under a seat in a down-firing configuration.
Bass Boost
This amplifier can be set bass boost to levels variably from 0 to 12 dB for optimal bass. With this precise control it enhances the overall balance and impact of all sounds according to listening preference and music style. The amplifier allows adjustment in three steps: 0 dB, 6 dB or 12 dB.
Subwoofer Firing Options
This subwoofer features a full grille and down-firing structure for cone protection and can be installed inside your vehicle's interior. This combines deep, powerful bass while seamlessly integrating physically, electrically, and more importantly improves the acoustics in the vehicle. This subwoofer was designed with the flexibility to be installed in three different ways. The provided feet can be screwed onto the bottom or top using the pre-drilled holes. Cushions on the feet prevent sliding. Down-fire –With the four feet installed to the bottom of the subwoofer to allow space between the cone and the floor, it will push the soundwaves towards the floor where they are reflected to deliver a richer sound for a stronger “rumble” effect. Up-fire – This option allows you to place the subwoofer with the cone facing upward. It can use the provided feet to prevent sliding. Firing the sub upwards moves more cabin air to deliver a stronger, more crisp sounding bass. Vertical-Facing – This option allows you to place the subwoofer with the cone facing on its side. It can use the provided feet to prevent sliding. This position will disperse sound like conventional loudspeakers producing fast and impactful bass, hitting the ear before being reflected off a surface which can lead to an especially precise and punchy sound.
CarSoundfit
Pioneer’s Car Sound Fit app is actually a car sound simulator for experiencing in-car sound with your own smartphone. Hear the difference between original car speakers and different Pioneer audio upgrades: convince yourself of the level of quality Pioneer can offer for your vehicle. For a virtual listening demonstration of these and many other Pioneer car speakers, download the free Pioneer CarSoundFit app.
FEATURES | |
---|---|
Built In Amp
No
|
CarSoundFit
Yes
|
Cut Out dimensions
No
|
Equivalent Compliance (VAS)
No
|
Free Air ResoNAnce (Fs)
No
|
Linear Excursion (Xmax)
No
|
Mounting Depth
No
|
Port Diameter
No
|
Port Length
No
|
Recommended Ported Box Internal volume
No
|
Recommended Sealed Enclosure Volume
No
|
Subwoofer Grille
Fully Covered Steel Mesh
|
Total Speaker Q (Qts)
No
|
FEATURES |
---|
Built In Amp
No
|
CarSoundFit
Yes
|
Cut Out dimensions
No
|
Equivalent Compliance (VAS)
No
|
Free Air ResoNAnce (Fs)
No
|
Linear Excursion (Xmax)
No
|
Mounting Depth
No
|
Port Diameter
No
|
Port Length
No
|
Recommended Ported Box Internal volume
No
|
Recommended Sealed Enclosure Volume
No
|
Subwoofer Grille
Fully Covered Steel Mesh
|
Total Speaker Q (Qts)
No
|
MATERIALS | |
---|---|
Basket Material
Metal
|
Center Cap Material
ABS
|
Cone Material
Carbon and Mica reinforced Injected Molded Polypropylene - IMPP
|
Custom Fit Basket
No
|
Damper
Poly cotton
|
Drive Cone Material
No
|
Gasket
Polypropylene
|
Installation Ring
Polypropylene
|
Magnet Material
Ferrite
|
Magnet Weight
29.6 oz
|
Surround Material
Rubber
|
Surround Type
Rolled
|
Voice Coil Material
Aluminum
|
Voice Coil Type
Single Voice Coil
|
Voice Coil wire
Copper
|
Wire Terminals
Screw
|
MATERIALS |
---|
Basket Material
Metal
|
Center Cap Material
ABS
|
Cone Material
Carbon and Mica reinforced Injected Molded Polypropylene - IMPP
|
Custom Fit Basket
No
|
Damper
Poly cotton
|
Drive Cone Material
No
|
Gasket
Polypropylene
|
Installation Ring
Polypropylene
|
Magnet Material
Ferrite
|
Magnet Weight
29.6 oz
|
Surround Material
Rubber
|
Surround Type
Rolled
|
Voice Coil Material
Aluminum
|
Voice Coil Type
Single Voice Coil
|
Voice Coil wire
Copper
|
Wire Terminals
Screw
|
PRODUCT PERFORMANCE | |
---|---|
Amp - Max Current Consumption
No
|
Amp - Power Source
No
|
Bass Boost
No
|
Continuous Power handling (RMS) - Watts
250
|
Frequency Response
25 Hz to 1.4 kHz
|
Maximum Peak Power Handling - Watts
700
|
Nominal Impedance - Ohm
2-Ohm
|
Sensitivity (1W/1m)
84dB
|
System-Type
Pre-Loaded
|
PRODUCT PERFORMANCE |
---|
Amp - Max Current Consumption
No
|
Amp - Power Source
No
|
Bass Boost
No
|
Continuous Power handling (RMS) - Watts
250
|
Frequency Response
25 Hz to 1.4 kHz
|
Maximum Peak Power Handling - Watts
700
|
Nominal Impedance - Ohm
2-Ohm
|
Sensitivity (1W/1m)
84dB
|
System-Type
Pre-Loaded
|