Voice Coil & Magnet
A subwoofer motor structure consists of the voice coil and magnet assembly. Increasing the diameter and length of the voice coil provides greater control of the woofer cone and higher power handling. To take full advantage, however, the magnet must also be increased, both in magnetic power and physical size. The D subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL output with no sacrifice in sound quality.
IMPP D Series
Polypropylene (PP) is a tough thermoplastic resin, ideal material for a speaker cone. The low mass and high damping of a PP cone generate good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting aramid fiber interlaced IMPP cone is ultra-thin and low mass with high rigidity and superior strength, built to produce natural, detailed sound with deep and powerful bass.
Surround
Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in less distortion and superior frequency response.
FEATURES | |
---|---|
Amp - Grounding
No
|
Built In Amp
No
|
CarSoundFit
Yes
|
Cut Out dimensions
9,23 cm
|
Equivalent Compliance (VAS)
15.4 Liters,0.54 Cu. Ft.
|
Free Air ResoNAnce (Fs)
36
|
Linear Excursion (Xmax)
5/16,8 mm
|
Mounting Depth
3-1/4,8 cm
|
Port Diameter
3,8 cm
|
Port Length
7-1/2,19 cm
|
Recommended Ported Box Internal volume
17 Liters,0.60 Cu. FT.
|
Recommended Sealed Enclosure Volume
17 Liters,0.6 Cu Ft
|
Subwoofer Grille
UD-10GL Sold Separately
|
Total Speaker Q (Qts)
0.75
|
FEATURES |
---|
Amp - Grounding
No
|
Built In Amp
No
|
CarSoundFit
Yes
|
Cut Out dimensions
9,23 cm
|
Equivalent Compliance (VAS)
15.4 Liters,0.54 Cu. Ft.
|
Free Air ResoNAnce (Fs)
36
|
Linear Excursion (Xmax)
5/16,8 mm
|
Mounting Depth
3-1/4,8 cm
|
Port Diameter
3,8 cm
|
Port Length
7-1/2,19 cm
|
Recommended Ported Box Internal volume
17 Liters,0.60 Cu. FT.
|
Recommended Sealed Enclosure Volume
17 Liters,0.6 Cu Ft
|
Subwoofer Grille
UD-10GL Sold Separately
|
Total Speaker Q (Qts)
0.75
|
MATERIALS | |
---|---|
Basket Material
Metal
|
Cone Material
IMPP - Aramid Fiber
|
Damper
Aramid Fiber
|
Installation Ring
Polypropylene
|
Magnet Material
Ferrite
|
Magnet Weight
43.4 oz
|
Surround Material
Rubber
|
Surround Type
Rolled
|
Voice Coil Material
Glass Imide
|
Voice Coil Type
Single Voice Coil 2-ohm
|
Voice Coil wire
Copper
|
Wire Terminals
Push Type
|
MATERIALS |
---|
Basket Material
Metal
|
Cone Material
IMPP - Aramid Fiber
|
Damper
Aramid Fiber
|
Installation Ring
Polypropylene
|
Magnet Material
Ferrite
|
Magnet Weight
43.4 oz
|
Surround Material
Rubber
|
Surround Type
Rolled
|
Voice Coil Material
Glass Imide
|
Voice Coil Type
Single Voice Coil 2-ohm
|
Voice Coil wire
Copper
|
Wire Terminals
Push Type
|
PRODUCT PERFORMANCE | |
---|---|
Amp - Max Current Consumption
No
|
Amp - Power Source
No
|
Bass Boost
No
|
Continuous Power handling (RMS) - Watts
350
|
Frequency Response
20 Hz to 3.4 kHz
|
Maximum Peak Power Handling - Watts
1300
|
Nominal Impedance - Ohm
2-Ohm
|
Sensitivity (1W/1m)
74dB
|
Speaker Line input Sensor
No
|
System-Type
Component
|
PRODUCT PERFORMANCE |
---|
Amp - Max Current Consumption
No
|
Amp - Power Source
No
|
Bass Boost
No
|
Continuous Power handling (RMS) - Watts
350
|
Frequency Response
20 Hz to 3.4 kHz
|
Maximum Peak Power Handling - Watts
1300
|
Nominal Impedance - Ohm
2-Ohm
|
Sensitivity (1W/1m)
74dB
|
Speaker Line input Sensor
No
|
System-Type
Component
|